Atlas Stopter K-50 25kg

ATLAS STOPTER K-50 is manufactured as a dry mix of high quality cement binder, aggregates and modifiers, reinforced with fiberglass.

ATLAS STOPTER K-50 is an element of the thermal insulation system and is used for:
- fixing of EPS thermal insulation boards (white and graphite) and making a reinforced layer on.
- fixing of mineral wool thermal insulation boards (façade and lamella) and making a reinforced layer on.

• ATLAS STOPTER K-50 is recommended as a reinforced layer for render coats on large surfaces in dark, intense colours - it extends the range of available façade colours, e.g. the required HBW coefficient can be reduced to as much as 10 %.

• Recommended for works where there is a need to combine two different thermal insulation materials: mineral wool and EPS boards - especially in the case of facades with fire protection.

• Recommended for insulation of standard, passive and energy efficient buildings – helps to reach the partition tightness required in passive housing, fixes insulation boards even 25 cm thick.

Packaging:
Paper bags 25 kg.

• High resistance to micro scratch formation – thanks to a special selection of fine fillers and additional structural reinforcement with a special combination of microfibres.
• High durability - the durability of the reinforced layer and resistance to weather conditions have been increased with the use of a combination of redispersible polymers, microfibers, special additives and modifiers.
• White cement base – the use of white cement reduces the formation of discoloration or gaps on the plaster (especially in white and pastel colours) and allows you to avoid additional painting.
• Very high adhesion – the high content of polymer dispersions ensures higher adhesion to to problematic substrates.
• Vapor permeable.
• Limited absorptiveness – together with thin-coat renders perfectly protects thermal insulation against water action.
• No priming mass is required - the unique structure of the bonded adhesive creates a layer to which thin-coat plasters adhere strongly, and the white cement reduces the possibility of discolouration from grey cement on the surface of this type of plaster.

• Min./max reinforced layer thickness
- on polystyrene 2 mm/ 5 mm - on mineral wool 4 mm/ 6 mm
• Pot life: approx. 4 hours
• Open time: min. 25 minutes