• allows rendering at temperatures above 0 °C and increased humidity (even above 80%)
• two times faster setting of renders
• three times faster early resistance to precipitation
• neutral to other material properties

Allows rendering at temperatures from 0 °C - recommended when carrying out façade work in low temperatures (from 0 to 10 °C) and increased humidity (even above 80%).

The product contains accelerators for the setting of polymeric binders in ATLAS renders.

• The action of the ATLAS ESKIMO G additive is to initiate the preliminary cross-linking of the polymer already at the early stage of water evaporation. This results in:
• - accelerating the setting process of renders at reduced temperatures and high relative humidity,
• - achieving early resistance to light rainfall.
• 2x faster setting of renders, 3x faster early resistance to precipitation - compared to renders setting without additives at 2 °C and 80% relative humidity.
• Under such thermo-humidity conditions, these parameters are respectively:
• - setting time: approx. 16 hours,
• - early resistance to rain: after 5 hours
• Application of the renders is possible when the temperature of the substrate and the air is above 0 °C a drop in temperature below zero can take place after the render has set completely, i.e. at the earliest 18 hours after its application has been completed.

ATLAS ESKIMO G is dedicated to the following ATLAS renders:

• - ATLAS SILICONE-SILICATE RENDER,
• - ATLAS SILICONE RENDER,
• - ATLAS SILICONE HYBRID RENDER,
• - ATLAS SILKON BA.

• Easy to use - it is a ready-to-use liquid render additive, added immediately before application.
• It is neutral to the other properties of the material - it does not reduce the strength of the material or degrade its performance once it has set.
• ATLAS ESKIMO G is a colourless liquid with a slightly perceptible ammonia smell.